Monday, September 06, 2010

PrintE-mail

Last Updated on Tuesday, 24 November 2009 13:39

Vertical Urethane Insulated

You can store up to 75 Tons (68.0 MT) of CO2 in a very limited space with this efficient and reliable vertical aluminum skin storage unit.

vertical-tank
General Specifications:
  • Pressure vessel: Constructed in accordance with Section VIII, Division 1 of the ASME Code for Unfired Pressure Vessels for a maximum allowable working pressure (MAWP) of 350 psig (24.1 bar).  2" NPS & under tank nozzles are schedule 80 stainless steel.
  • Seismic:  Per UBC 1997 seismic zone 4, importance factor of 1.0, soil profile types Sa, Sb, Sc, Sd or Se, greater than 10 km from a type A seismic source. Design to other Codes available on request.
  • Piping: Schedule 80 seamless pipe, 2,000 lbs (907.2 kg) forged steel fittings, 1/4 turn stainless steel isolation valves
  • Safeties: Dual ASME approved direct spring operated, sized for unconfined outdoor installation.  Larger capacity relief valves will be required for installation when located indoors or in a fire area.
  • Insulation: 4" (10.16 cm) Polyurethane
  • Outer jacket: .063" (0.16 cm) Aluminum
  • Vaporizers Optional: Steam, water or electric, capacities to 6,000 lbs/hr (2722 kg/hr)
  • Liquid level gauge: Differential pressure indicator type with 6" (15.24 cm) dial
  • Pressure gauge: 0 - 600 psig with 6" (15.24 cm) dial
  • Electrical Characteristics: 208/220/230/460 V, 60 Hz, 3 Phase.  Other voltages available upon request.
  • Control Cabinet: .040" (0.10 cm) prefinished aluminum, complete cabinet lifts off for total accessibility to refrigeration unit.
  • Manway installed for internal inspection and ease in cleaning
  • Stainless steel nozzles and valves
Safety relief valve removed for shipment due to height requirements on 14-ton (12701 kg) and larger units. All CO2 storage units are manufactured using normalized SA-612 carbon steel plate.

Vertical Carbon Dioxide Storage Units

Model Nominal Ton Capacity Height Length Width Empty Weight
681VA 6 Tons 8'4" 16'1" 6'5" 10,000 lbs
5.4 MT 2.54 m 4.90 m 1.96 m 4536 kg
1481VA 14 Tons 8'9" 20'4" 8'0" 15,500 lbs
12.7 MT 2.67 m 6.20 m 2.44 m 7031 kg
2681VA 26 Tons 8'9" 31'10" 8'0" 25,000 lbs
23.5 MT 2.67 m 9.70 m 2.44 m 11340 kg
3081VA 30 Tons 8'9" 35'10" 8'0" 30,000 lbs
27.2 MT 2.67 m 10.92 m 2.44 m 13608 kg
5081VA 50 Tons 10'5" 39'6" 9'6" 40,000 lbs
45.4 MT 3.18 m 12.04 m 2.90 m 18144 kg
7581VA* 75 Tons 11'5" 45'0" 10'6" 55,000 lbs
68.0 MT 3.48 m 13.72 m 3.20 m 24948 kg

 

 

 

 

 

 

 

 

 

 

*Standard 7581VA vertical model is not suitable for maximum seismic conditions.
NOTE: The dimensions shown above are for shipping tank in a horizontal position.

CO2 Storge Units

TOMCO2 Equipment Company

3340 Rosebud Road
Loganville, GA 30052
Phone: 770-979-8000
Toll Free: 800-832-4262
Fax: 770-985-9179

> Contact Us