Home Page
General Information
PMS System
Pressurized Solution Feed System
Gas Injection pH Control System
IMP-JET Submerged Combustion System
Are Mineral Acids and pH Problems giving you headaches?
Water Technologies Contacts
Submit your Design Data for a quotation
About TOMCO

Pressure Build Vaporizer
CO2 Vaporizer
Vaporizer
TOMCO2 has the vaporizers that fit into your particular localities. We offer electric vaporizers, steam vaporizers and water vaporizers. Therefore, you can use the power source that works most efficiently for you. No matter which energy source you use, each of our vaporizers are most effective and reliable in transforming your liquid CO2 into CO2 vapor. If you need your vapor at a higher temperature, or to maintain your CO2's gaseous state, our vapor heater is the right tool for your need.
   
    Electric Vaporizers
   
Your right choice if steam or water is unavailable. These vaporizers are highly energy efficient, and will provide all your vapor needs
   
    Modular Electric Pressure Build Carbon Dioxide Vaporizers
   
    Pressure Build Vaporizer Features:
  • Designed to NEMA 3R standards
  • 1" (2.54 cm) Carbon Dioxide blow down valve
  • Dual high temperature shutdown switches
  • 450 psig relief valve
  • pressure control set for operation between 245 psig and 255 psig (may be field adjusted)
  • 230/460 Volt, 60 Hz., 3 Phase operation (Other voltages available upon request)
   
Model Capacity Wattage Dimensions
(L x W x H)		 Weight
M-259 245 lbs/hr @ 230V 9,000 60" x 90" x 50" 231 lbs
111.13 kg/hr at 230 V 9,000 152.4 cm x 48.3 cm x 127 cm 105
kg
M-418 490 lbs/hr @ 230V 18,000 60" x 19" x 50" 233 lbs
222.26 kg/hr at 230 V 18,000 152.4 cm x 48.3 cm x 127 cm 106
kg
M-628 760 lbs/hr @ 230 V 28,000 55" x 21" x 57" 386 lbs
344.76 kg/hr at 230 V 28,000 139.7 cm x 53.3 cm x 144.8 cm 175
kg
M-1256 1525 lbs/hr @ 230V 56,000 101" x 21" x 57" 698 lbs
691.74 kg/hr at 230 V 56,000 256.5 cm x 53.3 cm x 144.8 cm 317
kg
 
  Direct to Process Vaporizers
 
  Direct to Process Vaporizer Features:
  • Designed to NEMA 3R standards
  • Replaceable heater platen
  • Pilot light indicator for control power & heater cycle
  • Low discharge temperature safety cut off
  • Circuit breaker load protection
  • 230/460 Volt, 60 Hz., 3 Phase operation (Other voltages available upon request)
 
Model Capacity Wattage Dimensions Weight
DTP-15 375 lbs/hr 15,000 22" x 23" x 37" 265 lbs
170.1 kg/hr 15,000 55.9 cm x 58.4 cm x 94 cm 120 kg
DTP-30 750 lbs/hr 30,000 22" x 23" x 37" 305 lbs
340.2 kg/hr 30,000 55.9 cm x 58.4 cm x 94 cm 139 kg
DTP-45 1125 lbs/hr 45,000 22" x 23" x 37" 345 lbs
510.3 kg/hr 45,000 55.9 cm x 58.4 cm x 94 cm 157 kg
DTP-60 1500 lbs/hr 60,000 22" x 23" x 37" 375 lbs
680.4 kg/hr 60,000 55.9 cm x 58.4 cm x 94 cm 170 kg
 
  Steam Vaporizers
 
  Highly efficient if you have steam in your plant that otherwise evaporates uselessly into the air
  Steam Vaporizer Features:
  • 450 psig safety relief valve
  • Steam service valve
  • "Y" type strainer
  • Inverted bucket steam trap
  • CO2 blow down valve
  • 1½ (3.81 cm) MPT liquid inlet
  • 1½ (3.81 cm) MPT vapor outlet
  • 1½ (3.81 cm) FPT steam inlet
  • ¾ (1.91 cm) FPT condensate return
  • Pressure build option available
  • Larger units available upon request
 
Model Capacity Dimensions Weight
SV-40 4,000 lbs/hr 117" x 12" x 28" 565 lbs
1814.4 kg/hr 297.2 cm x 30.5 cm x 71.1 cm 257 kg
SV-60 6,000 lbs/hr 160" x 12" x 28" 605 lbs
2721.6 kg 406.4 cm x 30.5 cm x 71.1 cm 275 kg
 
  Water Vaporizers
 
  Use the hot water generated elsewhere in your plant
  Water Vaporizer Features:
  • CO2 temperature rise from 0°F (-17.8°C) to 50°F (10°C) at listed capacities, flow rates and water temperatures
  • ASME coded heat exchanger with a tube
  • side working pressure of 400 psig and a shell side working pressure of 150 psig
  • Design temperature -20°F (-28.89°C) to 150°F (65.56°C)
  • Low water supply protection
  • Low discharge CO2 temperature protection
  • Pressure safety relief protection for CO2 and water
  • 4" (10.16 cm) 150 lbs (68.04 kg) flanged water inlet & outlet
  • 1" (2.54 cm) FPT CO2 inlet
  • 1½" (3.81 cm) FPT CO2 outlet
 
Model Capacity Dimensions Weight
WV-40 4,000 lbs/hr 137" x 24" x 32" 1,050 lbs
1814.4 kg/hr 348 cm x 61 cm x 81.3 cm 477 kg
WV-60 6,000 lbs/hr 139" x 26" x 32" 1,650 lbs
2721.6 kg/hr 353 cm x 66 cm x 81.3 cm 750 kg
 
  Vapor Heater
 
  The ultimate insurance against regulator freeze-ups and condensation on pipe lines. Increases the temperature of Carbon Dioxide from an average storage temperature of 0°F (17.8°C) to the desired temperature level. . .
  Vapor Heater
Features:
  • Heat transfer tube and heating elements
  • Pressure cast in common platen for maximum efficiency
  • Designed to NEMA 12 standards
  • Overheat protection
  • Adjustable temperature control
  • Stainless steel mounting brackets
  • ½" (1.27 cm) MPT inlet & outlet connections
  • Allowable working pressure 1000 psig
  • Flow rate 720 lbs/hr (326.59 kg/hr) @ 70°F (21.11°C)
  • 230/460 Volt, 60 Hz., 1 Phase operation
 
Model Capacity Wattage Dimensions Weight
CVH-4 720 lbs/hr 4,000 14" x 8.5" x 12" 47 lbs
326.59 kg/hr 4,000 35.6 cm x 21.6 cm x 30.5 cm 21 kg
 
  * Published weights include equipment only. Shipping crate(s) are not included.
 
  * Click on images for product specifications formatted for printing.
Back to Top